Help - Autoexec.cfg

SunSeeker · **Posted:** Sat Jan 02, 2010 4:11 pm

hello guys, I need help for configuring the game, I have a very discreet pc to play! I need an autoexec file that allows me to have more FPS does not interest me a good graphics!
thanks for the help!

Vengeance · **Joined:** Wed Jun 17, 2009 11:30 pm **Posts:** 91

i will pm u some commands from my autoexec

$omator · **Posted:** Sat Jan 02, 2010 5:31 pm

easiest way to gain more fps is to use ingame preset settings.
find them at:

OPTIONS -> SYSTEM -> VIDEO / VIDEO QUALITY

pick FASTEST chose your resolution and aspect ratio and hit apply/ok to save settings

Vengeance · **Joined:** Wed Jun 17, 2009 11:30 pm **Posts:** 91

Teh TC:E SAVIOR BESTOWS HIS WISDOM UPON US ONCE AGAIN THANK YOU O' GREAT ONE

$omator · **Posted:** Sat Jan 02, 2010 6:01 pm

Vengeance wrote:

Teh TC:E SAVIOR BESTOWS HIS WISDOM UPON US ONCE AGAIN THANK YOU O' GREAT ONE

bow down vengaboy and stay there

SunSeeker · **Posted:** Sat Jan 02, 2010 7:54 pm

$omator wrote:

easiest way to gain more fps is to use ingame preset settings.
find them at:

OPTIONS -> SYSTEM -> VIDEO / VIDEO QUALITY

pick FASTEST chose your resolution and aspect ratio and hit apply/ok to save settings

but these settings are saved directly in the autoexec file?
mmmh what is aspect ratio?

$omator · **Posted:** Sat Jan 02, 2010 8:31 pm

http://ur-gaming.com/portal/news.php?extend.9

Eqpe · **Joined:** Fri Jun 12, 2009 1:19 pm **Posts:** 411

to be honest changing the preset stuff is not that good. There a several cvar values that will give you a better fps. have a look at this page http://www.antman.info/wolf/cvar/

and try some different values, but don't use restricted values

$omator · **Posted:** Sun Jan 03, 2010 10:59 am

changing those vars not knowing what they do and what is their "safe" range may result in kicking by punkbuster or make game unstable

SunSeeker · **Posted:** Sun Jan 03, 2010 5:27 pm

You can send your autoexec file? I've lost my...

Vengeance · **Joined:** Wed Jun 17, 2009 11:30 pm **Posts:** 91

dude i pm'd u the commands just copy those in to the autoexec

SunSeeker · **Posted:** Sun Jan 03, 2010 7:56 pm

i've a problem with this cfg file... i found this config in a tce's clan forum

Code:

//ANTI SNOW/VILLAGE CRASH
//=======================
seta com_hunkMegs "512" //Can be set @ half the amount of RAM
seta com_zoneMegs "128" //zonemegs + soundmegs = Half hunkmegs maximum
seta com_soundMegs "64" //zonemegs + soundmegs = Half hunkmegs maximum

//ANTI NOOB_KICK
//==============
seta cl_maxpackets "125" //Maxpackets = Stable FPS value (be aware pb_kick depending on values)
seta com_maxfps "76" //Maxpackets = Stable FPS value (be aware pb_kick depending on values)
seta snaps "40" //linked to pb_sv_fps. "40" reduces ping
seta rate "25000" //leave it as it is (pb_kick alert)
seta cl_packetdup "0" //leave it as it is (pb_kick alert)
seta cl_pitchspeed "140" //leave it as it is (pb_kick alert)
seta cl_yawspeed "140" //leave it as it is (pb_kick alert)
seta cl_timeNudge "0" //leave it as it is (pb_kick alert)

//ANTI LAG
//========
seta pb_Sleep "80" //PB cvar some adjusted values can fix lag
seta pb_system "1" //Try "1" or set it back to "0" if its worse

//AIM
//===
seta sensitivity "2.5"
seta cl_mouseAccel "0" //disabled acceleration (set it to 0.001 can be good too)
seta in_dgamouse "2" //linux acceleration "OFF"
seta m_filter "0"

//RENDER
//======
seta r_mode "6" //Allows custom resolution
seta r_customaspect "1" //Allows custom resolution
seta r_customheight "1050" //Custom resolution
seta r_customwidth "1680" //Custom resolution
seta r_texturebits "16" //obvious -> set to high quality
seta r_colorbits "16" //obvious -> set to high quality
seta r_depthbits "24" //obvious -> set to high quality
seta r_stencilbits "8" //obvious -> set to high quality
seta r_roundImagesDown "2" //Texture Compression -> set to high quality ("5" maximum or PB kick)
seta r_picmip "0" //Texture Compression -> set to high quality ("2" maximum or PB kick)
seta r_ext_compressed_textures "0" //Texture Compression -> set to high quality
seta r_textureMode "GL_LINEAR_MIPMAP_NEAREST" // Trilinear (keep it set in coordination with ur gfx card driver settings)
seta r_primitives "0" //Affects FPS try if "2" is better

seta r_intensity "1" //Affects Gamma "1.5" maximum or PB kick
seta r_gamma "0.9" //gamma "2" maximum or PB kick
seta r_swapInterval "0" //Vsync : "1" if tearing issues - Affects FPS
seta r_finish "0" //sync every frame "1" is mouse lag - Affects FPS
seta r_dynamiclight "2" //obvious -> set to high quality
seta r_lodbias "2" //obvious -> set to high quality
seta r_lodCurveError "250" //leave it as it is (pb_kick alert)
seta r_ignoreFastPath "0" //leave it as it is (FPS drop alert)
seta r_subdivisions "4" //obvious -> set to high quality
seta r_fullscreen "1"
seta r_ignorehwgamma "1" //Special Gamma (less white) - Requires Vid_Restart for any r_gamma change
seta r_detailtextures "0" //Increase Texture quality (if possible)

//CUSTOMIZATION
//=============
seta cg_aspectMode "1" //Screen Ratio Adaptation
seta cg_aspectFovMode "2" //Screen Ratio Adaptation & balance
seta cg_atmosphericEffects "0"
seta cg_wolfparticles "1"
seta cg_dynamicEye "1" //HDR .49 setting
seta cg_showblood "0"
seta cg_bloodFlash "0.0"
seta cg_bloodDamageBlend "0.0"
seta cg_teamChatHeight "3" //Chat reduced to 3 lines
seta cg_teamChatTime "3000" //Chat display time reduced
seta cg_bloodTime "120"
seta cg_marktime "20000" //set it it to "0" if you have firelag
seta cg_brassTime "20000"
seta cg_freeAim "1" //.49 Freeaim
seta cg_gunPosition "2" //more to the right
seta cg_toggleCrouch "1"
seta cg_toggleAiming "0"
seta cg_noVoiceText "0" //VoiceChat text can be removed "1"
seta cg_noVoiceChats "1" //No more voice spam
seta cg_bobyaw "0.00"
seta cg_bobroll "0.00"
seta cg_bobpitch "0.00"
seta cg_bobup "0.00"
seta cg_runroll "0.00"
seta cg_runpitch "0.00"
seta cg_railTrailTime "400" //Hitbox/Laser setting
seta cg_weaponCycleDelay "15" //Avoids mousewheel bugs if used for weapon switching
seta cg_drawFPS "2"
seta cl_doubletapdelay "0" //removes autoprone

//MISC / USELESS
//==============
seta demo_drawTimeScale "0"
seta ui_bigFont "0.5"
seta ui_smallFont "0.15"

seta ui_r_picmip "2"
seta g_warmup "10" //changes warmup time on local server
seta scr_conspeed "69" //Speed of console opening


seta r_ext_texture_filter_anisotropic "0"
seta r_texture_anisotropy "0"
seta r_ext_compiled_vertex_array "1"
seta r_ext_multitexture "1"
seta r_facePlaneCull "1"

$omator · **Posted:** Sun Jan 03, 2010 8:16 pm

not performance/antilag cfg

change those:
seta r_depthbits "16"
seta r_stencilbits "0"
seta r_picmip "2"
seta r_ext_compressed_textures "1"
seta r_primitives "2"
seta r_dynamiclight "0"
seta r_lodbias "999"
seta r_lodCurveError "241"
seta r_ignoreFastPath "1"
seta r_subdivisions "20"
seta cg_bloodTime "0"
seta cg_marktime "0"
seta cg_brassTime "0"
seta cg_noVoiceChats "0"

SunSeeker · **Posted:** Sun Jan 03, 2010 8:24 pm

ok thx u!

$omator · **Posted:** Mon Jan 04, 2010 12:26 am

seta cl_maxpackets "76"
seta cl_packetdup "1"
seta r_gamma "1.3"
seta cg_wolfparticles "0"

Help - Autoexec.cfg

Who is online