TrueCombat
http://www.truecombatelite.com/forums/

single/burst/auto - what fire mode do you use?
http://www.truecombatelite.com/forums/viewtopic.php?f=36&t=496
Page 1 of 4

Author:  Dragonathan [ Sun Feb 19, 2006 6:02 am ]
Post subject:  single/burst/auto - what fire mode do you use?

single/burst/auto - what fire mode do you use?

I use single,
why? because you have a better aiming control with the single fire mode,
when i use auto, i cant even aim and shoot properly,
but when i use single, you can shoot and aim with out losing the aiming control,
you can shoot many bullets at a spot, with out swinging your rifle up & down.

Author:  Diane [ Sun Feb 19, 2006 7:07 am ]
Post subject: 

I use auto primarily because of my ping.

I have it down pat that I only fire short bursts, but it's easier in auto for me in close combat situations (with 350 up ping, it's hard to see ppl when they are right up in your face) - then it's just a matter of spray and pray! :P

Author:  Silentcrisis [ Sun Feb 19, 2006 2:57 pm ]
Post subject: 

I use Auto. I don't unload my clip in a couple of seconds. I just squeeze of a single shot or a burst fire. This way I don't have to worry about switching firing modes when up close and personal.

~Silentcrisis

Author:  XenoKiLLer [ Sun Feb 19, 2006 4:50 pm ]
Post subject: 

I use single most of the time being a sharpshooter. then in CQB, I use whatever is available.

Author:  Silentcrisis [ Sun Feb 19, 2006 4:51 pm ]
Post subject: 

Well, I always have my gun on auto. For I just squeeze the trigger and don't hold it down. I can control my shots with the AK-47 and if needed I'll unload a clip to pin an enemy down.

~Silentcrisis

Author:  XenoKiLLer [ Sun Feb 19, 2006 4:56 pm ]
Post subject: 

my mouse is so sensitive I just need to blow at it and itll fire.

Author:  Dragonathan [ Sun Feb 19, 2006 5:05 pm ]
Post subject: 

XenoKiLLer wrote:
my mouse is so sensitive I just need to blow at it and itll fire.


that whas not the question,
question whas... what firemode do you use? :D

Author:  XenoKiLLer [ Sun Feb 19, 2006 7:01 pm ]
Post subject: 

I can use single or burst but fire at the smae rate as auto with rapid clicking. O technically I could use any firemode with no hinderance. i still prefer single because its more accurate.

Author:  kozak6 [ Sun Feb 19, 2006 8:14 pm ]
Post subject: 

I'm with Diane on this one.

I lag so bad, by the time I shoot at you, you have shot me twice, so I need to dump as much lead downrange as fast as I can.

An interesting trick is to bind your mousewheel to fire. This way, you can achieve a much slower, accurate, and more controllable rate of fire with most weapons. Imagine firing the MAC pistol with the UMP's rate of fire. Very interesting.

Would this be considered an exploit?

Author:  XenoKiLLer [ Sun Feb 19, 2006 9:15 pm ]
Post subject: 

Ive never seen that point of doing that. I use my mousewheel to select weapons, the middle mouse to switch fire mode, and the right mouse to aim, left mouse and left ctrl to fire. With all the controls for the weapons within reavh its easy for me to run around, stop, aim and shoot.

Author:  Silentcrisis [ Sun Feb 19, 2006 9:56 pm ]
Post subject: 

I use my left mouse for switching fireing modes, my middle mouse for aiming and the scrolling middle button to switch weapons. It's a lot easier for me.

~Silentcrisis

Author:  XenoKiLLer [ Sun Feb 19, 2006 10:29 pm ]
Post subject: 

well we all got our own methods.

Author:  Heretic [ Mon Feb 20, 2006 2:25 am ]
Post subject: 

Full auto for Mac10 (One clip - one kill)
Single with any long range weapon

Author:  XenoKiLLer [ Mon Feb 20, 2006 12:09 pm ]
Post subject: 

you should be able to save the clip for atleast 3 kills.

Author:  hoak [ Mon Feb 20, 2006 12:18 pm ]
Post subject: 

Single always/only/ever...

Unfortunately TC:E doesn't scale select fire correctly with it's current weapon code/script...

Δ

Page 1 of 4 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/