TrueCombat http://www.truecombatelite.com/forums/ |
|
TCE CONFIG SAMPLE [HD Settings] http://www.truecombatelite.com/forums/viewtopic.php?f=29&t=1981 |
Page 1 of 2 |
Author: | ]Wo0[ [ Sat Dec 05, 2009 6:03 pm ] |
Post subject: | TCE CONFIG SAMPLE [HD Settings] |
Forget thales about the configs and black magic, here comes a detailled .cfg providing the best visual result you can get from TrueCombat:Elite. //ANTI SNOW/VILLAGE CRASH //======================= seta com_hunkMegs "512" //Can be set @ half the amount of RAM seta com_zoneMegs "128" //zonemegs + soundmegs = Half hunkmegs maximum seta com_soundMegs "64" //zonemegs + soundmegs = Half hunkmegs maximum //ANTI NOOB_KICK //============== seta cl_maxpackets "76" //Maxpackets = Stable FPS value (be aware pb_kick depending on values) seta com_maxfps "76" //Maxpackets = Stable FPS value (be aware pb_kick depending on values) seta snaps "40" //linked to pb_sv_fps. "40" reduces ping seta rate "25000" //leave it as it is (pb_kick alert) seta cl_packetdup "1" //leave it as it is (pb_kick alert) seta cl_pitchspeed "140" //leave it as it is (pb_kick alert) seta cl_yawspeed "140" //leave it as it is (pb_kick alert) seta cl_timeNudge "0" //leave it as it is (pb_kick alert) //ANTI LAG //======== seta pb_Sleep "80" //PB cvar some adjusted values can fix lag seta pb_system "1" //Try "1" or set it back to "0" if its worse //AIM //=== seta sensitivity "1.800000" seta cl_mouseAccel "0" //disabled acceleration (set it to 0.001 can be good too) seta in_dgamouse "2" //linux acceleration "OFF" seta m_filter "0" //RENDER //====== seta r_mode "-1" //Allows custom resolution seta r_customaspect "1" //Allows custom resolution seta r_customheight "1050" //Custom resolution seta r_customwidth "1680" //Custom resolution seta r_texturebits "32" //obvious -> set to high quality seta r_colorbits "32" //obvious -> set to high quality seta r_depthbits "24" //obvious -> set to high quality seta r_stencilbits "8" //obvious -> set to high quality seta r_roundImagesDown "0" //Texture Compression -> set to high quality ("5" maximum or PB kick) seta r_picmip "0" //Texture Compression -> set to high quality ("2" maximum or PB kick) seta r_ext_compressed_textures "0" //Texture Compression -> set to high quality seta r_textureMode "GL_LINEAR_MIPMAP_NEAREST" // Trilinear (keep it set in coordination with ur gfx card driver settings) seta r_primitives "0" //Affects FPS try if "2" is better seta r_intensity "1" //Affects Gamma "1.5" maximum or PB kick seta r_gamma "0.9" //gamma "2" maximum or PB kick seta r_swapInterval "0" //Vsync : "1" if tearing issues - Affects FPS seta r_finish "0" //sync every frame "1" is mouse lag - Affects FPS seta r_dynamiclight "2" //obvious -> set to high quality seta r_lodbias "0" //obvious -> set to high quality seta r_lodCurveError "250" //leave it as it is (pb_kick alert) seta r_ignoreFastPath "0" //leave it as it is (FPS drop alert) seta r_subdivisions "4" //obvious -> set to high quality seta r_fullscreen "1" seta r_ignorehwgamma "1" //Special Gamma (less white) - Requires Vid_Restart for any r_gamma change seta r_detailtextures "1" //Increase Texture quality (if possible) //CUSTOMIZATION //============= seta cg_aspectMode "1" //Screen Ratio Adaptation seta cg_aspectFovMode "2" //Screen Ratio Adaptation & balance seta cg_atmosphericEffects "1" seta cg_wolfparticles "1" seta cg_dynamicEye "1" //HDR .49 setting seta cg_showblood "1" seta cg_bloodFlash "0.5" seta cg_bloodDamageBlend "0.5" seta cg_teamChatHeight "3" //Chat reduced to 3 lines seta cg_teamChatTime "3000" //Chat display time reduced seta cg_bloodTime "120" seta cg_marktime "20000" //set it it to "0" if you have firelag seta cg_brassTime "20000" seta cg_freeAim "1" //.49 Freeaim seta cg_gunPosition "2" //more to the right seta cg_toggleCrouch "1" seta cg_toggleAiming "0" seta cg_noVoiceText "0" //VoiceChat text can be removed "1" seta cg_noVoiceChats "1" //No more voice spam seta cg_bobyaw "0.00" seta cg_bobroll "0.00" seta cg_bobpitch "0.00" seta cg_bobup "0.00" seta cg_runroll "0.00" seta cg_runpitch "0.00" seta cg_railTrailTime "400" //Hitbox/Laser setting seta cg_weaponCycleDelay "15" //Avoids mousewheel bugs if used for weapon switching seta cg_drawFPS "2" seta cl_doubletapdelay "0" //removes autoprone //MISC / USELESS //============== seta demo_drawTimeScale "0" seta ui_bigFont "0.5" seta ui_smallFont "0.15" seta ui_r_picmip "0" seta g_warmup "10" //changes warmup time on local server seta scr_conspeed "69" //Speed of console opening The easiest way is to copy paste the settings you want to use in the c:\WOLFET\tcetest\autoexec.cfg file thanks to WordPad (so everytime you load TCE the settings are applyed : no more 800*600 after crash). |
Author: | Diane [ Sat Dec 05, 2009 6:16 pm ] |
Post subject: | |
Thanks! ![]() |
Author: | luka [ Sat Dec 05, 2009 6:36 pm ] |
Post subject: | |
Thx woo u love red colour ? ![]() |
Author: | ]Wo0[ [ Sat Dec 05, 2009 6:45 pm ] |
Post subject: | |
luka wrote: Thx woo
u love red colour ? ![]() rofl ![]() |
Author: | HoboCoP [ Sun Dec 06, 2009 2:15 pm ] |
Post subject: | |
mmmm sample? without suggested values? you are giving so much away woo! HAHAHAHAHA tce is great, the only game where the community is small enough that everyone is paranoid about their amazing config |
Author: | ]Wo0[ [ Sun Dec 06, 2009 2:43 pm ] |
Post subject: | |
HoboCoP wrote: mmmm
sample? without suggested values? you are giving so much away woo! HAHAHAHAHA tce is great, the only game where the community is small enough that everyone is paranoid about their amazing config I dont get your point Hobocop, did you try it ? The thing is this cfg sets TCE for the best quality you can get, so yes most of the values are edited and most of them are explained ... what can i do more ? And yes i agree, its fun to see people wondering about the ownzor secret configs ![]() |
Author: | $omator [ Sun Dec 06, 2009 2:48 pm ] |
Post subject: | |
HoboCoP wrote: mmmm
sample? without suggested values? you are giving so much away woo! HAHAHAHAHA tce is great, the only game where the community is small enough that everyone is paranoid about their amazing config thought same thing inconsistent post and cfg imho but + in total for at least trying =)) |
Author: | $omator [ Sun Dec 06, 2009 2:54 pm ] |
Post subject: | |
]Wo0[ wrote: The thing is this cfg sets TCE for the best quality you can get, so yes most of the values are edited and most of them are explained ... what can i do more ?
if you turn off voicechat or rolls turn off blood and particles also ![]() |
Author: | =MAveXII=NoiR# [ Sun Dec 06, 2009 4:19 pm ] |
Post subject: | |
you ********* its not a secret anymore ![]() THX WOOOOO |
Author: | HoboCoP [ Sun Dec 06, 2009 6:11 pm ] |
Post subject: | |
my point is u have highlighted about 2 cmds that are not controlled by something in the tce menu anyway. surely the easiest way to give someone a high quality cfg is by just giving them a cfg, instead of individual commands? no? |
Author: | ]Wo0[ [ Sun Dec 06, 2009 8:06 pm ] |
Post subject: | |
HoboCoP wrote: my point is u have highlighted about 2 cmds that are not controlled by something in the tce menu anyway. surely the easiest way to give someone a high quality cfg is by just giving them a cfg, instead of individual commands? no?
Yeah i see your point, i would highlight some interesting settings too. Now i am not fan of cfg you put in your folder and do not understand what you are doing, then the best thing is to take few cvars and explain them, after it can be useless for tons of people but if it can help those who never spent time in .cfg making thats fine. |
Author: | Harbeck [ Mon Dec 07, 2009 10:15 pm ] |
Post subject: | |
using nvidia control panel to improve/override aplication settings like antialiasing 4x will make it look beter or its placebo effect? |
Author: | ]Wo0[ [ Mon Dec 07, 2009 10:35 pm ] |
Post subject: | |
Yes any quality setting from gfx drivers like antialiasing can improve the render. |
Author: | Eqpe [ Mon Dec 07, 2009 11:05 pm ] |
Post subject: | |
well why just 4? I put it to 16 |
Author: | Harbeck [ Tue Dec 08, 2009 12:09 am ] |
Post subject: | |
it can be set to 16x too ), wasnt wallmark must be set to 0, because it was suposed to cause firelag? ok nvermind i found it (seta cg_marktime "20000" ) thx for sharing this HD settings and explaining each line, i only had this before: // required for TCE //seta com_soundMegs "64" //seta com_hunkMegs "192" //seta com_zoneMegs "64" //seta s_khz "44" //seta r_maxpolyverts "16384" about the maxpolyverts? i dont remember where i caught that line |
Page 1 of 2 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |